 |
About Us |
 |
|
|
|
|
| Home > About Us >Company News |
| |
| Why should I choose ALEAN Full Network Alarm System? |
| 2020.06.16 |
|
1. Industry background
In the alarm industry, the traditional alarm system has been used for many years, with the advantages of good stability and high security, but there are also problems such as complex wiring, limited transmission distance, and insufficient compatibility. The traditional alarm system is in urgent need of overall upgrade!
Since ALEAN proposed the concept of "Full Network Alarm", it has successively launched a series of products such as Network Beam Detector, Network Barrier, Network pulse fence and Full Network Alarm Panel, which integrates network communication into alarm products and promotes the networking of alarm systems. In addition, on the basis of networking, POE power supply is realized, and construction and wiring are simpler.
With the continuous introduction and application of the full network alarm products,the product and solutions continuous improvement and maturity, its advantages such as simpler wiring, real-time monitoring of device information, and better compatibility have gradually been highly recognized by the market, which has also accelerated the transformation of the alarm system from the analog era to the digital and network era.
In this issue, we will make a comprehensive comparison between the traditional alarm system and the Full network alarm system to facilitate users to choose the right solution.
2. Network Alarm System VS Traditional Alarm System
Communication method
The traditional alarm system mainly communicates through the bus. If the transmission reaches a certain distance, or the number of equipment in the system increases, the bus signal will be continuously attenuated. And when in a complex outdoor environment, it may be disturbed.
The whole network alarm system is based on TCP/IP communication. Compared with traditional alarm systems, which have complicated wiring, complicated operation, and backward communication methods, the full network alarm system focuses on the advantages of transmission and power supply, and has simple installation and maintenance in application. , Stable operation, longer transmission distance, deeper intelligence, stronger anti-interference performance and other advantages.
Construction wiring
Wiring is a very important part of the traditional alarm system during the installation . In addition to the communication cables, the power cables are also very cumbersome.
Full network series alarm products, external network ports, can be used by accessing the local area network of the project site, solve the problem of alarm signal transmission and equipment power supply through a network cable, flexible deployment, simple and beautiful.
Power supply
Traditional alarm products must be connected to a special power supply, so the location of the power supply and the way of laying the power cord must be considered during installation
ALEAN full network series alarm products can be powered by POE. POE switches can supply power to the device through the port without the use of a power adapter. It is more convenient to install.
At the same time, the full network series alarm products support external power supply, when the site does not have POE power supply conditions, you can use a power adapter to supply power.
Intelligent
When the traditional alarm system is in operation, the detector is affected by factors such as power supply voltage, signal strength, and component parameter changes, it cannot remotely analyze the collected signal intelligently, so it is easy to generate false alarms.
ALEAN network alarm system uses intelligent holographic technology, voltage, frequency, signal strength and other information can be clearly displayed on the alarm panel and back-end software platform in real time, the working status is clear at a glance, to ensure that the equipment runs in real time..At the same time, it is not necessary to go to the project site to check the status of the detector, which is convenient for daily maintenance or troubleshooting.
System compatibility
In the project, monitoring, access control and other systems all use network transmission. The traditional alarm system cannot be directly connected to other security subsystems, becoming an independent system in the project. Not only will it cause complicated pre-project installation, but also cause problems such as system incompatibility and cumbersome maintenance during later operation.
The same as other security subsystems, the full network alarm system adopts network transmission, with better system compatibility, seamless connection with other subsystems.
Cost budget
Traditional Alarm System costs:
Equipment cost (traditional alarm equipment) + various types of communication cables + power supply (sockets, pipes, power supply equipment, etc.) + labor costs, etc.
Due to the complicated wiring of traditional equipment, the labor cost will increase.
Alean Full Network Alarm System costs:
Equipment cost (network alarm equipment) + labor cost, etc.
The use of TCP/IP communication + POE power supply can save a lot of wiring (communication cables, power cords) costs, the full network alarm system supports remote debugging, time costs and labor costs will also be lower, and later maintenance costs also less.
Comparison summary
Through comparison, we can find that the full network alarm system is superior to the traditional alarm system in terms of overall performance and cost, and can provide more reliable, safer, and cost-effective solutions for alarm projects in various industries.
3.Alean Full Network Alarm Product
|
|
| |
|
|
